SB系列传感器接线盒
• 用于EOAT上传感器接线。• 可以转换PNP和NPN信号。• Is/Os可以是拉电流（PNP）、灌电流（NPN）或干触点。• 可以串联多个盒子来控制更多传感器。• 输入信号重复LED，便于排除故障（不适用于SB15）。• 提供应变消除装置和固定至型材的套件。
Connection boxes for series SB sensors• Used for sensor wiring on EOATs.• PNP and NPN signals can be converted.• Is/Os can be current sourcing (PNP), sinking (NPN) or dry contact
Several boxes can be connected in series to control more sensors
Input signal repetition LED for easy troubleshooting(not for SB15).
Provided with strain reliefs and kit for fastening to profles.
双钳口自动校准平行i气动夹具(SGP-S系列)
•双动作。
•反冲调整系统。
•小尺寸高i性能。
•紧固的构造使其非常适合重型作业的运用，使用寿命长，免维护。
•不同的紧固和输送选项。
•随时用于 PRO-SN…HS (1) 可编程磁性传感器。
•食物级润滑油FDA-H1。
Double acting.• Backlash adjusting system.• High performance in small dimensions.• The rugged construction lends itself to heavy duty applicationsfor a trouble free long life without maintenance.
Various fastening and air feeding options.• Ready for PRO-SN …HS (1) programmable magnetic sensor.• Food grade grease FDA-H1.
传感器
磁性传感器(可选) 通过活塞上的一个磁铁检测出操作位置。因此，大量的磁性材料和强烈的磁场可能会造成传感问题。
The operating position is detected by proximity magnetic sensors
(optional) through a magnet p1aced on the piston.
Therefore, avoid using the gripper in the vicinity of intense
magnetic ffelds or near a large mass of ferromagnetic material
as this may cause detection errors.